Wechat: 13869171699
Español
English
Chinese
    новости
    The role of the roots pump
    The role of the roots pump
    2025-04-02
    The roots pump is a vacuum pump with no internal compression, and the compression ratio is usually very low, so high and medium vacuum pumps require a backing pump. It is a vacuum pump that relies on the synchronous and counter-rotating pushing action of a pair of vane-shaped rotors in the pump cham
    Installation precautions for roots blowers
    Installation precautions for roots blowers
    2025-04-01
    1. Safety protection:Fans should not be installed in places frequented by people to prevent injuries and burns.Avoid installing the fan in places where flammable, explosive and corrosive gases are likely to be produced to prevent accidents such as fire and poisoning.2. Foundations & Foundations:
    Roots blower installation steps
    Roots blower installation steps
    2025-04-01
    1. Select the installation location:Roots blowers should be installed in bright, dust-free buildings, away from direct sunlight and rain.If it must be installed outdoors, necessary rain and explosion protection measures should be taken, and special attention should be paid to the safety protection o
    Roots vacuum pump disassembly and assembly
    Roots vacuum pump disassembly and assembly
    2025-03-31
    When disassembling and reassembling the booster pump, the following precautions must be followed:1. Before disassembling the roots vacuum pump, measure and record the clearance of each part of the rotor.2. Try to avoid hitting with a heavy hammer, and the removed parts should not be bruised, and kee
    Roots vacuum pump regular inspection
    Roots vacuum pump regular inspection
    2025-03-31
    1. Daily inspection:1) Oil level check: too much oil will increase the temperature, and too little oil will cause poor lubrication.2) Temperature check: Check the temperature of each part of the pump with a thermometer.3) Motor load check: measure the motor load with a power meter or current, voltme
    Composition and function of the pressure relief valve
    Composition and function of the pressure relief valve
    2025-03-28
    1.The pressure relief valve is composed of a cylinder, a piston group, a protective cover, etc. 2.The cylinder is welded by the left and right end flanges and the cylinder body.3.In order to enhance wear resistance and prevent rusting, the inner surface of the cylinder is plated with hard chrome.4.T
    Use and maintenance of pressure relief valves
    Use and maintenance of pressure relief valves
    2025-03-28
    During normal operation, the air compressor system pressure should not exceed 7.84×105Pa (8kg/cm2) Frequently check the cylinder, piston, flange connection and pipeline of the pressure relief valve, there should be no air leakage, and the fastening parts should not be loose.A special person should
    Installation precautions for roots blower
    Installation precautions for roots blower
    2025-03-27
    1. The fan should not be installed in places where people often go to prevent injury and scalding.2. The fan should not be installed in a place that is prone to produce flammable, explosive and corrosive gases to prevent accidents such as fire and poisoning.3. According to the direction of the intak
    ···4445464748···

    быстрая ссылка

    продукт

    Greentech International (Zhangqiu) Co., Ltd.

    связаться с нами

    Позвони нам.

    +86-531-83117088

    E-mail:   greentech@vip.163.com

    адрес: Mingshui Economic Development Zone, Zhangqiu, Jinan City, Shandong, China

    Wechat / Whatsapp: 13869171699

    Copyright © 2020  Greentech International (Zhangqiu) Co., Ltd.  | All Rights Reserved